Konica Minolta PagePro 1350EN, User Manual

Page: 39 / 92

About Media
31
What type and amount of media can I load?
Note
Do not allow media to go above the fill limit mark inside the tray or the
media may not be fed correctly.
Media Storage
Keep media on a flat, level surface in its original wrapper until it is time to
load it.
If media has been removed from its wrapper, place it in its original packaging
and store in a cool, dark place.
When storing media, avoid
„
Moisture, excess humidity
Keep media between 30% to 65% relative humidity. Toner does not
adhere well to moist or wet paper
On the other hand, media that has been stored for a long time without
staying in its packaging may dry up too much and also cause jamming.
„
Direct sunlight
„
Excess heat (up to 35° C/95° F)
„
Dust
„
Leaning against other objects or placed in an upright position
Media Source/Maximum Amount Input Capacity
Media Type Tray 1 Manual Feed Tray
Plain
Paper
60–90 g/m 2 (16–24 lb)
250 sheets 1 sheet
Special
Media Envelopes 10 sheets 1 sheet
Label sheets 10 sheets 1 sheet
Letter head 10 sheets 1 sheet
Postcards (Japanese Size) 50 sheets (first face) 1 sheet
20 sheets (second face) 1 sheet
Thick paper 91–163 g/m 2
(24–90 lb)
10 sheets 1 sheet
Transparencies 5 sheets 1 sheet