E-3
(7)
<Only when installing in the marketing areas other
than North America>
Attach the supplied ferrite core to the cable A as
shown in the illustration.
(8) Attach the hard disk to the main body. (Four sup-
plied screws)
Note:
Hook the two claws of the hard disk at the posi-
tions shown in the illustration.
(9) Connect the cables installed in step (6) to the
machine.
Note:
Ensure that the cables A and B do not contact with
the MFP board.
(10) Place the cable A in the wire saddle and place
the cables A and B in the edge cover.
Ferrite core
<Only when the ferrite core
has been attached in step (7)>
Ferrite core
