Konica Minolta HD-524 Installation Manual Download Page 1

E-1

HD-524 

Hard Disk 

INSTALLATION MANUAL

A888-9551-01

Applied Machines: C368/C308/C258/PRO958/958/808/758

COLOR MFP: 36 ppm/30 ppm/25 ppm

MFP: 95 ppm/80 ppm/75 ppm

Product Code: A7PU/A7PY/A7R0/A796/A8KN/A795

1. Accessory parts

*1

The parts is not used in North America.

*2

Used only when this option is installed to the 
models C368/C308/C258.

Note:

    • The hard disk is highly susceptible to impact. 

Handle it with utmost care not to drop it or hit it 
against any object. Do not touch the board sur-
face and pins.

    • This manual provides the illustrations of the 

accessory parts and machine that may be 
slightly different in shape from yours. In that 
case, instead of the illustrations, use the 
appearance of your machine to follow the 
installation procedure. This does not cause any 
significant change or problem with the proce-
dure.

No.

Name

Shape

Q’ty

1. Hard disk

1

2. Cable A

1

3. Cable B

1

4. Ferrite core

*1*2

1

5. Screw

(3 x 8 mm)

4

6. Installation 

manual 

1

set

Keep this bag away from babies and 
children. Do not use in cribs, beds, 
carriages, or playpens.

The thin film may cling to nose and 
mouth and prevent breathing. This bag is 
not a toy.

Summary of Contents for HD-524







Reviews: