Konica Minolta CM-M6, Instruction Manual

Page: 22 / 128

19
Removing the Battery
1
Turn the power OFF.
2
Open the battery compartment cover located on the
back of the instrument.
3
While pressing the protrusion marked in the
diagram, slide the battery in the direction of the
arrow.
4
Lift up the battery to remove it.
„
Connecting the AC Adapter
CAUTION
• To supply AC power to the instrument, always use the AC adapter (AC-A311) supplied with the instrument.
• Before connecting or disconnecting the AC adapter jack or plug, make sure that the instrument is turned OFF.
• Firmly push the AC adapter output plug or USB cable inlet in completely.
Operating Procedure
1
Turn the power OFF.
2
Connect the AC adapter’s output plug to the AC
adapter’s input terminal.
3
Connect the AC adapter power plug to a 100 V
(50/60 Hz) AC outlet.