Konica Minolta CM-23d, Instruction Manual

Page: 88 / 151

85
„
Measurement Option Settings
To set measurement options, select “Measurement setup” from the <Measurement cond.> menu screen. Select or
specify the following items as the measurement options.
• Specular Component : SCI (incl. reflected light) / SCE (excl. reflected light) / Simultaneous SCI+SCE measurement
• Auto average (1 to 10) : Specify the number of measurements for auto averaging.
• Manual average (1 to 30) : Specify the number of measurements for manual averaging.
• Manual average option : Select the save method when performing manual averaging.
Operating Procedure Start the procedure from the measurement screen.
1
Press [MENU], and then use [
◀
] or [
▶
] to display the
<Measurement cond.> menu screen.
Memo
To return to the previous screen , press [MENU] or [ESC] .
2
Use [
▲
] or [
▼
] to move the cursor to “Measurement
setup”, and then press the [Confirmation] key.
The <Measurement setup> screen
is displayed.
3
After setting the measurement conditions, press the
[ESC] to return to the previous screen.