8
Configuration of the CA-410 Series
1. Configuration
The CA-410 series consists of the following three systems:
z
Probes
Sensor units for measuring displays.
Can be connected to a PC to perform measurement (using PC software).
Can be connected to a data processor to perform measurement.
z
Data Processor CA-DP40
Can connect up to ten probes simultaneously to perform measurement.
Can be connected to a PC so that it can be controlled from the PC (using PC software).
z
PC software CA-S40
Can control a probe connected to a PC to perform measurement.
Can control a data processor connected to a PC to perform measurement.
The Probe + Data Processor Instruction Manual (this document) contains the following descriptions for probes and Data
Processor CA-DP40:
•
Handling procedure and specifications of probes
•
How to measure when probe and data processor are connected
•
How to connect the data processor to a PC
Summary of Contents for CA-410 Series
Page 12: ......
Page 40: ......
Page 139: ......
Page 140: ...En 9222 AA1J 12 2017 KONICA MINOLTA INC BIFBDA...