Utility Tool
13
bizhub PRO 1200/1200P/1051 Printer
13-32
Setting Up a SCO UNIX Remote Printer to Use lpd
Use the following procedure to set up a remote printer on the host that sends
jobs to the network interface card using lpd.
1
At the prompt, enter the mkdev rlp command.
–
You cannot run mkdev rlp twice. If you have additional printers to
be configured, use the rlpconf command.
2
You are now asked a series of questions. Respond as follows (shown
in bold type):
–
Please enter a printer name:
lprprinter1
–
Is lprprinter1 a remote printer or a local printer?
R
–
Enter remote host name:
lprprinter
–
Confirm the information you entered:
Y
–
Confirm the preceding connection as your system
–
default:
Y
–
Enter another printer name or quit setup:
Q
3
If necessary, stop and restart your remote daemon.
4
Using a line editor of your choice, edit the /etc/printcap file and change
the:
rp=entry to PRINT.
