Konica Minolta bizhub PRESS 1052 User Manual Download Page 85

Page: 85 / 540

bizhub PRESS 1250/1052

2-71

2.8

Adjusting Response Time of Touch Keys: Accessibility

2.8

Adjusting Response Time of Touch Keys: Accessibility

This machine sets a specific interval of time between pressing the

touch panel

key and machine response

in advance. Press

Accessibility

on the

control panel

to select this interval, so that the machine responds to

the

touch panel

key operation only when the key is held down for a specified period of time.

This function is convenient for physically handicapped users who have difficulty in pressing keys with accu-
racy.

Reference

The Utility Menu Screen provides the setting for response time. For details, see Section 7 of the POD Admin-
istrator's Reference.

Response time can be selected from Normal, 0.5 second, 1 second, 2 seconds, and 3 seconds.

Press

Accessibility

on the

control panel

The

Accessibility

LED lights in green to indicate that the spec-

ified response time is set on the machine.

If [Normal] is selected as response time, pressing

Accessi-

bility

will not make any change in the touch key operation.

To deactivate this function, hold down

Accessibility

on the

control panel

for over a second.

The

Accessibility

LED goes off, and normal response time will be restored in touch key operation.

Summary of Contents for bizhub PRESS 1052





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for bizhub PRESS 1052

Reviews:

Related manuals for bizhub PRESS 1052

Brands by name

Popular brands

Konica Minolta bizhub PRESS 1052, User Manual

Search results

Summary of Contents for bizhub PRESS 1052

Reviews:

Related manuals for bizhub PRESS 1052

Brands by name

Popular brands