bizhub PRESS 1250/1052
8-72
8.12
Using Auto Ring Binder GP-502
8
8.12
Using Auto Ring Binder GP-502
The machine with
Auto Ring Binder GP-502
installed punches file holes in output sheets to make a booklet
bound with a bind part through the holes.
d
Reference
Please refer to [OPERATION MANUAL] supplied with
Auto Ring Binder GP-502
for the information on how
to operate the ring binder or screens displayed on the display panel.
8.12.1
Making Booklets Bound with Bind Parts through Punch Holes: Ring Bind
When not using the Insert Sheet function, the same paper is used for all pages to make a bound booklet.
Using the Insert Sheet function in combination, you can use different types of paper for each of the body
sheets, covers, and insert sheets to make a bound booklet.
d
Reference
See page 7-5 for details of Insert Sheet in the Application.
0
When using the same paper for all pages to make a bound booklet, select one tray to be used. The
Insert Sheet setting is not required.
0
When binding a simplex-printed set without using the Insert Sheet function, select the print side ([Inside
Print] or [Outside Print]) for each of the top and last sheets of the booklet.
0
When using the Insert Sheet function, select a tray for each of the covers and insert sheets.
0
When printing on covers using the Insert Sheet function, specify the print side for covers in the Insert
Sheet setting. In this case, it is not required to make a selection for the print side of the top sheet and
last sheet of the booklet. Using tabbed paper in the same conditions, the top sheet will be fixed to [Out-
side Print] and the last sheet to [Inside Print].
0
Select the bind direction ([Left Bind] or [Right Bind]) for the booklet. This selection is effective only for
the portrait original, while the setting is fixed to the top binding for the landscape original.
0
Available paper weight ranges from 21 to 57 lb Bond.
0
The maximum number of sheets that can be bound is 102 (21 lb Bond body/insert sheets with 57 lb
Bond covers), and the minimum number is 7 (21 to 31 lb Bond body/insert sheets with 44 to 57 lb Bond
covers).
0
Available paper sizes are 8.5
e
11
v
and its tabbed paper size, 8.5
e
11T
v
. The tab extension width of
tabbed paper should be 0.51 inches or less. Any other sizes are unavailable for all of body sheets, cov-
ers, and insert sheets. Tabbed paper cannot be duplex-printed.
0
Load paper for body sheets in a main body tray or a paper feeder unit tray. When using the Insert Sheet
function, load paper for covers or insert sheets in a main body tray, paper feeder unit tray, or PI-PFU
tray other than that for the body sheets. Paper loaded in a PI-PFU tray cannot be printed.
0
Make a sample copy to check the pagination of a bound booklet. The sample copy is output, without
being bound, to the secondary tray of a downstream device next to the ring binder.
1
Position the original.
%
Prepare the original in the order of the front cover, body, and then the back cover.
2
Load paper into the tray.
%
Load paper for body sheets in a main body tray (tray 1, tray 2) or
Paper Feeder Unit PF-703
/
PF-
706
(trays 3 to 8). When not using the Insert Sheet function, the tray for covers is not required.
%
When using the Insert Sheet function, load paper for covers or insert sheets in a main body tray (tray
1, tray 2),
Paper Feeder Unit PF-703
/
PF-706
(trays 3 to 8), or
Large Capacity Post Inserter PI-
PFU
(PI-PFU1 to PI-PFU3). Paper loaded in a PI-PFU tray cannot be printed.
3
Change the paper setting of the tray to be used, as required.
%
For details on changing the Tray Setting, see Section 3 of the POD Administrator's Reference.
%
If temporary change of the paper setting is desired, change the setting from the Paper Presetting
Screen. See page 6-39 for details.
Summary of Contents for bizhub PRESS 1052
