manualshive.com logo in svg

Konica Minolta bizhub PRESS 1052, User Manual

Share
Download
Konica Minolta bizhub PRESS 1052 User Manual Download Page 217

bizhub PRESS 1250/1052

6-39

6.6

Paper Presetting

6

6.6

Paper Presetting

Each paper tray has been preset with paper specifications such as size or type for the paper to be loaded. 
This section describes how to temporarily use another paper than any specified in the Tray Setting.

6.6.1

Paper Setting Outlines

The following five setting items are provided as the paper setting:

-

Paper Tray

-

Paper Size

-

Paper Conditions

-

Air Assist

-

Dehumidify Mode

NOTICE

Air Assist is not provided for the post inserter of 

Folding Unit FD-503

 and 

Post Inserter PI-502

.

NOTICE

Dehumidify Mode is provided only for the trays of 

Paper Feeder Unit PF-703

 attached with the optional 

De-

humidifier Heater HT-505

. The paper feeder unit has three trays; however, up to two dehumidifier heaters 

can be attached.

The paper setting offers three types of operation depending on what the setting is intended for.

6.6.2

Paper Presetting Outlines

This section describes the Paper Presetting which allows you to make the paper setting temporarily from the 
Copy Screen.

d

Reference

Tray Setting and Paper Setting Register/Delete can be made from the Machine Screen. For details, see Sec-
tion 3 of the POD Administrator's Reference.

Paper Presetting consists of the following paper sizes and conditions that can be specified as desired.

Operation

Description

Setting item

Tray Setting

Specify the paper size, paper conditions, air assist, and 
dehumidifier mode settings for each tray.

Paper Tray
Paper Size
Paper Conditions
Air Assist
Dehumidify Mode

Paper Presetting

Specify a paper size and paper conditions for the tray to 
be used when temporarily loading different paper size or 
type from that already specified for the tray in Tray Setting. 
The air assist setting is unavailable.

Paper Tray
Paper Size
Paper Conditions

Paper Setting Regis-
ter/Delete

Register only the paper conditions out of the five setting 
items. You can recall the desired one to ease the setting 
operation in Tray Setting or Paper Presetting.

Paper Conditions

Paper setting item

Description

Setting options

Paper Tray

Select the tray to be specified in Pa-
per Presetting.

Tray 1, Tray 2 (main body trays)
Tray 3, Tray 4, Tray 5, Tray 6, Tray 7, 
Tray 8 (

Paper Feeder Unit PF-703/PF-

706

)

Summary of Contents for bizhub PRESS 1052





























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands