Konica Minolta bizhub PRESS 1052, User Manual

Page: 392 / 540

bizhub PRESS 1250/1052 8-67
8.10 Using Two Machines in Tandem: Tandem Mode 8
8.10.5 Troubleshooting in Tandem Mode/Printing
Case Solution
Distribution Recovery The machine finished with printing detects the status of the other
machine and distributes the remaining print quantity again to contin-
ue that job.
Or, when trouble occurs in either machine during the tandem mode
printing, the machine that is trouble free detects the status of the
troubled machine and completes the job by taking over the remain-
ing print quantity after finished with its allocation.
When either machine is finished
with printing It detects the status of the other machine and automatically takes
over a half of the remaining print quantity with the Distribution Re-
covery mode activated.
When a paper jam, out of paper,
or SC-code (E-code, F-code)
trouble occurs on either machine It automatically takes over the remaining print quantity with the Dis-
tribution Recovery mode activated.
For SC-code (E-code, F-code) trouble, take appropriate trouble-
shooting measures to correct the problem after the tandem printing
job is completed.
When memory overflow occurs
on This MFP The scanning job will stop immediately, and the tandem printing job
will be suspended on both machines.
At this time, the tandem mode is not yet released. Take the same
measure to be applied for single machine on which memory over-
flow occurs.
When memory overflow occurs
on the Partner MFP The Partner MFP will restart the tandem printing job when the mem-
ory becomes available after completing some reserve jobs.
In this case, the Distribution Recovery mode functions to continue
the tandem printing job on This MFP until the Partner MFP becomes
available for the job.
If the memory of the Partner MFP does not become available despite
the elapse of time, the tandem mode will be released on the Partner
MFP.
The Distribution Recovery mode functions to complete the job on
This MFP.
When the power is turned off on
either machine The tandem mode/printing will be released automatically in either
case. Restart the procedure from the first step.