Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
13
Component Considerations
FS-534 Staple Finisher
continued
Staple Mode
Paper Sizes: 8.5" x 11" to 11" x 17"; Corner, 2 Position (Side, Top)
Available Options
PK-520 Punch Kit (2/3-hole Punch)
Power Requirements
Supplied from Main Unit
Max. Power Consumption Less than 56 W
Dimensions (W x D x H)
20.81" x 25.25" x 40.25"
(When tray is pulled out 25.88 (W)
Weight Approx.
88.188 lb.
Consumables
SK-602 Staples (5,000 Staples x 3)
NOTE: FS-534 supports banner printing when installed on C754e/C654e.
PK-520 Punch Kit
(For FS-534)
Applicable FS-534
Number of holes
2 or 3 holes
Support Paper Weight
Thin Paper (14 lb. to 15 lb.), Plain Paper (15 lb. bond to 24 lb. bond),
Recycled Paper (15 lb. to 24 lb.),
Support Paper Size
2-hole Punch Setting: 11" x 17", 8.5" x 14", 8.5" x 11"
3-hole Punch Setting: 11" x 17", 8.5" x 11"
Power Requirements
Supplied from Finisher FS-534
Dimensions (W x D x H)
2.375"x 19.375" x 5.563"
Weight Approx.
Approx. 3.938 lb.
FS-534 Staple Fi SD-511 Saddle Stitcher
*
A combination of FS-534 (see specs listed above) and SD-511 (specs listed below)
Applicable FS-534
Number of bins
1 Tray
Paper types
Thin Paper (14 lb. to 15 lb.), Plain Paper (15 to 24 lb),
Thick Paper 1/1+/2 (24.25 to 55.5 lb.)*
*Can only be used as a cover page.
Paper sizes
12.25" x 18"
L
, 11" x 17", 8.5" x 14"
L
, 8.5" x 11",
Number of Center Stapled Plain Paper (15 to 24 lb.)
or Half-Folded Sheets
1–3 Sheets:
20 Sets
4–10 Sheets:
10 Sets
11–20 Sheets:
5 Sets
Number of
1 Sheet:
30 Sets
Tri-Folded Sheets
(Letter Only)
2–3 Sheets:
10 Sets
Staple mode
Booklet, 2-point staple
Maximum staple sheet
20 sheets: (19 sheets/14 to 24 lb.) + (1 sheet/13 to 55.5 lb.)
Dimensions (W x D x H)
8.25" x 21.875" x 21.563"
Weight
52.94 lb.
Consumables
SK-602 (5,000 x 3 pkg/case)
Power requirements
Supplied from finisher
*NOTE: The SD-511 Saddle Stitcher is not available as a separate accessory.
AU-202H
AU-204H
AU-211P
AU-202H
AU-204H
AU-211P
AU-202H
AU-204H
AU-211P
