Konica Minolta BIZHUB C3351, Quick Start Manual

Page: 45 / 102

3-6 bizhub C3851FS/C3851/C3351
About this machine 3 3.1
O
v
er
vi
ew of Th
is
Mac
h
in
e
Ch
a
p
ter 3
3.1.2 Option configuration
List of optional components
No. Name Description
1 Main unit Scans the original in the scanner section, and prints a scanned image
in the printer section.
2 Authentication Unit
AU-102 Performs user authentication by scanning vein patterns in the finger.
To install the
Authentication Unit AU-102 , the Local Interface Kit
EK-P05 or Local Interface Kit EK-P06 is required in addition to the
Working Table WT-P02 .
3 Authentication Unit
AU-201S Performs user authentication by scanning information recorded on
the IC card or NFC-compatible Android terminal.
To install the
Authentication Unit AU-201S , the Local Interface Kit
EK-P05 or Local Interface Kit EK-P06 is required in addition to the
Mount Kit MK-P02 .
This unit can also be installed on the Working Table WT-P02 .
4 Working Table WT-
P02 Provides an area to temporarily place an original or other materials.
This is also used when the
Authentication Unit AU-102 or Authenti-
cation Unit AU-201S is installed or when Keyboard Holder KH-P01
is attached.
5 Keyboard Holder KH-
P01 When using an external keyboard, attach this holder to Working Ta-
ble WT-P02 .
6 Finisher FS-P03 Staples the printed sheets.
For staples, use
Staple Kit SK-501 .
7 Keypad KP-101 It is equipped on the side of the Control Panel .
Allows you to enter numbers by using the Hardware Keypad.
8 Paper Feed Unit PF-
P13 Allows you to load up to 500 sheets.
Up to two levels can be attached.
9 Desk DK-P03 Used to install this machine on the floor.
This component may not be able to be used depending on the region
the machine is used in.
8 9
1
10
4
6
7
5
2 3