Konica Minolta bizhub C258, Quick Start Manual

Page: 95 / 266

3-18 bizhub C368/C308/C258
Scan-to-Send function 3 3.2
Bas
ic Se
tt
in
gs
an
d O
p
e
rat
io
n
s
Ch
a
p
ter 3
3
Checking computer information
% Check the information required for Store Address, and fill out the checklist. For details, refer to
page 3-20.
4
Configuring your computer
% Configure settings to share a computer, or create a dedicated folder to receive files. For details, refer
to page 3-21.
5
Registering destinations
%
Register destinations to which files are sent while checking the checklist. For details, refer to
page 3-23.
Operation flow
The following describes a transmission flow. For details, refer to page 3-25.
1
Loading the original
2
Selecting a destination
%
Select a registered destination, and check the settings such as the file type and image quality.
3
Press the Start key.
% Press the Start key to scan the original.
Checking the cable connection
Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Then, check that the IP address is displayed.
• For IPv4 environment • For IPv6 environment