manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 19

Introduction

x-18

C250

Available features

Selecting the print color

The color used to print copies can be specified, for example, the copy can 
be printed in full color or in black and white.

For details, refer to “Selecting a color setting” on page 3-29.

Automatically selecting the paper

The most appropriate paper size can automatically be selected based on the 
size of the loaded document and the specified zoom ratio.

For details, refer to “Automatically selecting the paper size (“Auto Paper Se-
lect” setting)” on page 3-32.

Adjusting copies to the size of the paper

The most appropriate zoom ratio can automatically be selected based on the 
size of the loaded document and the specified paper size.

For details, refer to “Automatically selecting the zoom ratio (“Auto Zoom” 
setting)” on page 3-35.

Specifying separate horizontal and vertical zoom ratios

By specifying separate horizontal and vertical zoom ratios, copies of the doc-
ument can be resized as desired.

For details, refer to “Typing In separate X and Y zoom ratios (independent 
zoom settings)” on page 3-41.

Scanning the document in separate batches

A document with a large number of pages can be divided and scanned in 
separate batches. Double-sided copies can be produced by using the origi-
nal glass or the document pages can be alternately loaded onto the original 
glass or into the ADF, and then all pages can be copied together as a single 
job.
For details, refer to “Scanning the document in separate batches (“Separate 
Scan” setting)” on page 3-11 and “Scanning a multi-page document from 
the original glass” on page 3-13.

ABC

ABC

ABC

c250.book  Page 18  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands