manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 168

Basic copy operations

3

C250

3-35

Basic copy op

er

at

ions

Chapter 3

3.7

Specifying a zoom setting

The zoom ratio can be set in order to make a copy on paper with a size dif-
ferent than the document or to enlarge or reduce the size of the copy image.

The following procedure describes how to specify the Zoom setting.

Automatically selecting the zoom ratio (“Auto Zoom” setting)

The most appropriate zoom ratio is automatically selected based on the size 
of the loaded document and the specified paper size.

0

The default setting is “×1.0”.

0

The “Auto Zoom” and “Auto Paper Select” settings cannot be selected 
together. If the “Auto Paper Select” setting was selected, the Paper 
screen appears. In the Paper screen, specify the desired Paper setting.

0

If the “Auto Zoom” setting is selected and an enlargement is to be copied 
on paper larger than the document, load the document with the same ori-
entation as the paper.

1

In the Basic screen, touch [Zoom].

The Zoom screen appears.

2

Touch [Auto Zoom].

c250.book  Page 35  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands