Konica Minolta bizhub C203 Series, User Manual

Page: 451 / 534

C353/C253/C203 11-16
Utility mode
11
Left Panel Display Default
Search Option Settings
11.3.3 Copier Settings
Parameter Description Default Setting
Left Panel Display Default Select the information displayed as the default in the left
panel.
•
Job List:
A list of the jobs that are being performed and queued
to be performed is displayed.
• Check Job Settings:
The currently specified copy settings are displayed.
Job List
Job Display Setting Select the job list information displayed in the left panel.
•
List Display:
A list of the jobs that are being performed and queued
to be performed is displayed.
• Status Display:
The progress of the job being performed is displayed.
List Display
Parameter Description Default Setting
Uppercase and Lowercase
Letters Select whether or not to differentiate between uppercase
and lowercase letters. Differentiate
Search Option Screen Select whether or not to display [Uppercase and Lower-
case Letters] setting in the advanced search. OFF
Parameter Description Default Setting
Auto Booklet ON when
Fold & Staple Select whether or not the "Booklet" function is selected au-
tomatically when the "Center Staple & Fold" setting is se-
lected. This parameter is available only if optional finisher
FS-609 is installed or optional finisher FS-519 is installed
with the saddle stitcher attached. Auto Select Booklet
Auto Zoom For Combine/
Booklet Select whether or not the preset zoom ratios are automati-
cally selected when the "Auto" Paper setting is selected
and a combined copy setting or the "Booklet" function is
selected.
•
Auto Display Zoom Ratio:
The following zoom ratios are specified.
2in1, Booklet: 70.7%
4in1: 50.0%
8in1: 35.3%
• Off:
The zoom ratio is not selected automatically.
Auto Display Zoom Ratio
Auto Sort/Group Selection Select whether or not the "Sort" setting is automatically se-
lected when 2 or more copies are set to be printed in a sin-
gle job.
•
Yes:
When an original is loaded into the automatic docu-
ment feeder and the [Start] key is pressed, the "Group"
setting is automatically selected if the original consists
of only one page, and the "Sort" setting is automatically
selected if the original consists of two or more pages.
• No:
The "Sort" or "Group" setting is not selected automati-
cally.
Yes
Default Copy Settings Specify the default settings for Copy mode.
The copy settings selected when the machine is turned on
(the power switch is set to "
n ") or the [Reset] key is pressed
can be specified.
•
Current Setting:
The settings specified from the touch panel before Util-
ity mode was entered are set as the default settings for
Copy mode.
• Factory Default:
The factory default settings are set as the default set-
tings for Copy mode.
Factory Default