Konica Minolta Bizhub 4000i, User Manual

Page: 14 / 227

Using the Embedded Web Server
Note: This functionality is available only in network printers or printers connected to print servers.
Use the Embedded Web Server to:
•
Check printer supplies status.
•
Configure supply notifications.
•
Configure printer settings.
•
Configure network settings.
•
View reports.
To access the Embedded Web Server for your printer:
1
Obtain the printer IP address by printing the network setup page or menu settings page, and then finding
the TCP/IP section.
For more information, see “Printing the Network Setup Page” on page 14 .
Notes:
•
The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Open a web browser, and then type the printer IP address in the address field.
3
Press Enter .
Printing a menu settings page
From the home screen, touch Settings > Reports > Menu Settings Page .
Printing the Network Setup Page
From the home screen, touch Settings > Reports > Network > Network Setup Page .
Using the keyboard on the display
Do one or more of the following:
•
Drag a finger over the key to announce the character.
•
Lift the finger to enter or type the character in the field.
•
Press Backspace to delete characters.
•
To hear the content in the input field, press Tab , and then press Shift + Tab .
Learning about the printer 14