Konica Minolta bizhub 308e, Quick Manual

Page: 137 / 214

bizhub 658e/558e/458e/368e/308e 3-43
3.3 Fax function 3
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Check that the IP address is displayed.
Tips
-
In general, the default settings are available for network connection; however, some network environ-
ments require a change on network settings.
-
If no IP address is displayed, you need to set up the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide CD/DVD.
- For information on the default administrator password, refer to the User’s Guide CD/DVD.
Installing the fax driver
Install the fax driver on the PC by using the installer.
This section describes how to configure the standard print settings.
0
Administrator privileges are required to perform this task.
1
Insert the fax driver DVD into the DVD drive of the computer.
2
Select [Agree the Software End User License Agreement.] and [Install printers/MFPs], and click [Next].
3
Select this machine from the list of detected printers.
% If multiple identical models are displayed, check the IP address to select an appropriate one. For
details on how to check the IP address of this machine, refer to page 3-43.
4
Select [Specify manually.], and check [FAX] is selected.
5
Click [Next].
6
Click [Install].
7
Click [Finish].