Konica Minolta bizhub 266, User Manual

Page: 82 / 186

5-4 bizhub 306/266
Transmitting an Internet fax 5 5.1
5.1.2 Basic transmission procedure
1
Press the Fax key.
This changes to the fax mode and displays the fax screen.
2
Load the original.
% For details on how to load the original, refer to page 3-5.
3
When necessary, specify a image quality.
% For details on Quality , refer to page 5-9.
4
Enter a destination E-mail address using the one-touch dial, speed dial, or Keypad .
%
When necessary, press the
,
key to specify the transmission time or select the Basic or Advanced
mode. For details, refer to page 5-7.
5
Press the Start key.
% This starts scanning and sending if the original has been loaded onto the ADF .
After sending is completed, a "long beep" sounds.
% To stop sending, press the Clear/Stop key, then select [YES] in the displayed screen.
%
If you load the original on the Original Glass , go to step 7.
6
Use the
+
/
,
key to select [AUTO DETECTION] or [MANUAL], then press the OK key.
7
To start scanning, press the OK key.
%
When changing the scanning paper size, press the
)
key to respecify the size.
8
When continuously scanning the original, load the next original, then press the OK key.
% Repeat this procedure until scanning of originals is completed.
MEMORY
QUALITY:STD/TEXT
OTHER SETTING=
,
MEMORY
QUALITY:STD/TEXT
NEXT PAGE?(AUTO)
SCAN=OK (TX=START)