manualshive.com logo in svg

Konica Minolta bizhub 266, User Manual

Share
Download
Konica Minolta bizhub 266 User Manual Download Page 76

bizhub 306/266

4-14

4.6

Specify this machine as a relay distribution station (Relay broadcasting)

4

4.6

Specify this machine as a relay distribution station (Relay broad-
casting)

This machine can be specified as a relay distribution station.

If this machine is specified as a relay distribution station, it receives an original sent from other fax machine 
(relay instruction station) once, and send it to multiple destinations (receiving stations).

Tips

-

The relay broadcasting function supports F-code communication.

-

The same value cannot be registered between the Relay User Box ID and Confidential User Box ID.

-

When using the 

One-Touch Dial Key

, speed dial, or group dial, up to 50 destinations can be specified.

-

A document received by a relay distribution station is printed out.

To specify the relay broadcasting, you must register a 4-digit Relay User Box ID and receiving stations (last 
destinations) in advance. Up to 10 Relay User Boxes can be specified. For details, refer to page 7-19.

Summary of Contents for bizhub 266



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands