Konica Minolta bizhub 266, User Manual

Page: 44 / 186

bizhub 306/266 3-12
3.4 Specifying a destination 3
3.4.6 Program dial
Register a destination number and sending-receiving function such as the specified-time transmission or
polling reception in a
One-Touch Dial Key in advance; you can only press the One-Touch Dial Key to exe-
cute the function.
d
Reference
For details on how to register a destination in the program dial, refer to page 7-13.
1
Load the original.
%
For details on how to load the original, refer to page 3-5.
%
This step is not required for polling reception.
2
When necessary, specify a image quality.
% For details on Quality , refer to page 3-7.
%
This step is not required for polling reception.
3
Press a key registered in the program dial among One-Touch Dial Keys 29 to 32 .
%
One-touch dial keys 29 to 32 are available when the Switching Plate is opened upward.
% If you press an incorrect One-Touch Dial Key , press the Clear/Stop key to cancel it.
4
Press the Start key.
The registered function starts automatically.
% To stop sending, press the Clear/Stop key, then select [YES] in the displayed screen.
d
Reference
To cancel the specified-time transmission, press the
Function
key, then select [CANCEL RESERV.] to cancel
the reservation. For details, refer to page 3-20.