For special features press the
application
key and select the desired function.
BASIC BOOK COPYING:
This feature is utilized when making copies out of a book.
1.
From the default copy screen, press the application key.
2.
Press
book copy.
3.
From this screen, make sure
full scan
is highlighted.
4.
Ok the selection, and make sure
non image area erase
and
auto layout
are
highlighted along with
book copy.
(non image area erase eliminates the
black toner background commonly associated with copying from books,
and
auto layout
will center the image on the page). Ok these selections to
go back to the main copy screen.
5.
Open the copier lid (RADF unit), place the book on the platen glass and
press start.
Leave the lid open!
(notice that the copier will not make the
copies
yet
. It is storing the information it scans into its memory).
6.
After the scan lamp is finished scanning, you may flip to another page and
repeat step 5 (for as many pages needed out of the book).
7.
When finished scanning all desired pages, take the store key off, and press
the start button. The copies requested will come out in consecutive order.
BASIC BOOKLET:
This feature is utilized for making booklets.
1.
From the default copy screen, press the application key.
2.
Press
booklet
.
3.
Leave
left binding
highlighted.
4.
Ok the selections at this screen, then ok the selections again at the
application screen in order to go back to the main copy screen.
5.
Load the originals in the document feeder in the order in which you read
them (cover first, page 1, page2, page 3…)
6.
Press start.
7.
Fold the copies in half.
(note: to make a newsletter, after step 5 select a paper tray with 11 x 17 size
paper, and continue with the instructions above).