Konica Minolta AccurioLabel 230, Quick Manual, Page: 163 / 194

AccurioLabel 230 6-13
6.4 Clearing paper jams 6
6.4.3 Remove paper jam inside the main body
1
Open the front door of Roll Winder.
2
Cut the media.
When cutting the paper, be careful not to injure your hands or fingers.
3
Open the front door of Roll Winder.
J-5121 94 Feeding and con-
veying section Fusing speed cor-
rection error 1. Confirm the
speed detection
sensor of the
printer.
2. Open the
front
door of the main
body and confirm
the paper.
J-5102 96 Roll Winder
RW-110
/ Roll
Winder RW-210
Error related to
Roll Winder
RW-110
/ Roll
Winder RW-210
(while printing or
conveying paper)
1. Remove the pa-
per inside the
main body, and
then open and
close the
front
door of the main
body. For instruc-
tions on how to
remove the paper,
refer to
page 6-13.
2. Check the sta-
tus of
Roll Winder
RW-110 / Roll
Winder RW-210 .
J-5103 96 Roll Winder
RW-110
/ Roll
Winder RW-210
Error related to
Roll Winder
RW-110
/ Roll
Winder RW-210
(except for
J-5102)
1. Check the con-
dition of the paper
set, and then
open and close
the
front door of
the main body.
2. Check the sta-
tus of
Roll Winder
RW-110 / Roll
Winder RW-210 .
JAM code Jam location
number Where to check Function Instructions