Regulation Notices for Main Body
2
2-12
Accurio Label 190/bizhub PRESS C71cf
2.3
2.3.2
Ozone Release
During print operation, a small quantity of ozone is released. This amount is not large enough to harm anyone
adversely. However, be sure the room where the machine is being used has adequate ventilation, especially
if you are printing a high volume of materials, or if the machine is being used continuously over a long period.
2.3.3
Electromagnetic Interference and Safety Approvals
This product must be used with a shielded network cable and shielded USB interface cable.
The use of non-shield cables is likely to result in interference with radio communications.
WARNING:
This is a Class A product. This product must not be used in residential areas. In a residential environment this
product may cause radio interference in which case the user may be required to take adequate measures.
For European Users
This product complies with the following EU directives:
Main Body: 2004/108/EC, 2006/95/EC and 2011/65/EU
Roll Winder RW-101/Roll Winder RW-201: 2006/42/EC and 2011/65/EU
This declaration is valid for the areas of the European Union (EU).
Declaration of Conformity is available at "http://www.konicaminolta.eu/".
This product complies with IEC61000-3-12.
This product is GS-certified for the Konica Minolta branded model C71cf and AccurioLabel 190.
For German Users
Der Höchste Schalldruckpegel beträegt 85 dB(A) oder weniger nach ISO 7779.
This device is not intended for use in the direct field of view at visual display workplaces.
To avoid incommoding reflexions at visual display workplaces this device must not be placed in the direct
field of view.
For U.S.A and Canada Users
This product is cTUVus-certified for the Konica Minolta branded model C71cf and AccurioLabel 190.
Notification for California Customers
This product uses a CR Lithium Battery which contains perchlorate material.
This perchlorate warning applies to perchlorate-containing lithium batteries sold or distributed in California,
USA.
“Perchlorate Material - Special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.”
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential area is likely to cause harmful in-
terference in which case the user will be required to correct the interference at his own expense.
WARNING:
The design and production of this unit conform to FCC regulations, and any changes or modifications must
be registered with the FCC and are subject to FCC control. Any changes made by the purchaser or user with-
out first contacting the manufacturer will be subject to penalty under FCC regulations.
This device must be used with a shielded network cable and a shielded USB cable. The use of non-shielded
cables is likely to result in interference with radio communications and is prohibited under FCC rules.