Konica Minolta 0902, Service Manual

Page: 76 / 302

Chapter 3 Troubleshooting
3-22
3.2.11 06500 ~ 06534: Insertion Slot Detection Sensor Errors
•
Error codes S column: Errors at the read operation/calibration.
•
Error codes E column: Errors during erase operation.
•
Error codes I column: Errors during initialization.
Error code Description of the error Response
(References to replacement methods are
listed at the end of the table.)
S E I
06500 06515 06530 Insertion slot detection
sensor error (when
initializing)
One or more of the insertion slot
detection sensor 1, the insertion
slot detection sensor 2, or the
back plate drop detection
sensor was not OFF when
initializing the cassette (before
opening the shutter).
1. Confirm there are no foreign objects in
the sensor hole of the insertion slot,
and remove it if there are any.
2. Confirm following and replace the
faulty parts.
(sensor may be soiled)
•
Insert slot detection sensor 1
•
Sensor wire (LLB2):
JP32 ~ MCN1 (MDU)
•
Sensor wire (LPB2):
JP34 ~ MCN1 (MDU)
•
Insert slot detection sensor 2
•
Sensor wire (LLB1):
JP31 ~ MCN1 (MDU)
•
Sensor wire (LPB1):
JP33 ~ MCN1 (MDU)
•
Back plate drop detection sensor
•
Sensor wire:
JP37 ~ MCN1 (MDU)
•
MDU
06501 06516 06531 Insertion slot detection
sensor error (when loading
cassette)
One or more of the insertion slot
detection sensor 1 or the
insertion detection sensor 2 was
not OFF when loading the
cassette (from dropping to the
second falling position to shutter
close).
Confirm the following, and replace faulty
parts:
•
Insertion slot detection sensor 1
•
Sensor wire (LLB2):
JP32 ~ MCN1 (MDU)
•
Sensor wire (LPB2):
JP34 ~ MCN1 (MDU)
•
Insertion slot detection sensor 2
•
Sensor wire (LLB1):
JP31 ~ MCN1 (MDU)
•
Sensor wire (LPB1):
JP33 ~ MCN1 (MDU)
•
Back plate drop detection sensor
•
Sensor wire:
JP37 ~ MCN1 (MDU)
•
MDU
06502 06517 06532 Insertion slot detection
sensor error (when ejecting
cassette)
One or more of the insertion slot
detection sensor 1, the insertion
detection sensor 2, or the back
plate drop detection sensor was
not OFF when ejecting the
cassette (after opening shutter).