Konica Minolta 0902, Service Manual

Page: 294 / 302

Chapter 8 Appendix
8-8
„ Adjustment Procedure
•
See "6.3 Adjustment of Justifier Motor (Page 6-6)" for the Amount of Justification procedure for the
justification.
•
See "6.6 Adjustment of Pressing Amount (Page 6-15)" for the Pressing Amount procedure for the
pressing.
8.1.8 [Monitoring] Panel
Confirmation of the operation can be performed by step operation in accordance to the read action in the
[Monitoring] panel.
„ Operation Procedure
•
See "4.4 Confirming by Step Operation (Page 4-8)" for the operation procedure of the [Mechanical
Sequence].
•
See "4.5 Confirming the Status of the Sensors (Page 4-17)" for the operation procedure of the
[Sensors].
4 Send When you click this button, the value for the "Amount of
Justification" or "Pressing Amount" when the
justification or pressing was performed last will be set as
the reader parameter.
Note
Current values right after the "Adjustments" panel was displayed are in the "Amount of
Justification" and "Pressing Amount".
No. Item/button Description
1 Sequential Test Cassette Type Select the cassette used to perform the step operation.
Select [Cassette] when the actual cassette is to be
used.
Select the cassette size to be emulated if actual
cassette is not used.
[Initialization] Perform the initialization operation.
[Next] Perform the operation step by step according to the
read sequence every time it is clicked.
2 Sensor
Monitoring [Start] Start the monitoring of the sensor status.
[Stop] Stop the monitoring of the sensor status.
No. Item/button Description
1
2