Kongskilde 8200 DF Series, Assembly / Parts

Page: 58 / 70

58
Rear Hitch Hydraulic Kit Assembly (Optional)
INSTALLING REAR HITCH HYDRAULIC KIT- 760034003
-Requires Optional Rear Hitch 760034002
1. Attach coupler mount bracket (1) to rear hitch using 1/2”-13 x 1.25 cap screws (7) and 1/2”-13
lock nuts (8)
2. Install male couplers (4) to 3/8" x 432" hoses (2).
3. Slide male coupler end of hoses (2) through trimmed opening in rear hitch tube.
4. Route hoses over existing hoses and clamps to front of cultivator.
5. Secure female couplers (3) to coupler bracket (1) using retaining rings (5) on either side of
bracket (1) and inserted into two snap ring grooves on coupler (3).
6. Attach female end of hoses (2) to female couplers (5).
7. Secure hoses to existing hose clamps by using two hose holder clamps in each location, routing
two hoses through each clamp.
8. Secure clamps to top of existing hose clamps using existing lock washer and nut.
�
�
�
�
����������
���������
�����������
������������
�����������
������� �
���������
�������������
����������
���������
�����������
�
�
�
�
�
�
�