Seatex XPR 100
Editing a target
If some information about a target in the
Target list
has been changed, you can edit the
target information.
Context
Procedure
1
Select the
System menu
button,
, to open the
System
menu.
2
Select
Tools →Target Editor
3
Select the target you want to edit.
4
Select
Edit
.
5
Edit the values you want to change.
Important
The
Id
cannot be changed. Create a new target if you want to use a different Id.
Frequency pair
and
Address code
must be correct for the system to function properly.
6
Select
Save
when finished.
Related topics
•
on page 30
•
on page 32
Setting the system to Active or Standby mode manually
The Sensor Unit on the shuttle tanker is by default set to
Standby
mode. It must be
activated to start measuring range and bearing to the FPSO/FSU.
14
XPR-D-User/1.0
Summary of Contents for XPR 100
Page 1: ...Operator Manual XPR 100 Long Range Relative Positioning System...
Page 2: ......
Page 48: ...2019 Kongsberg Seatex...
