Kongsberg Simrad TV80, Reference Manual

Page: 114 / 356

112
406388/F
The
Sensor List
page presents a table with all the catch monitoring sensors that have been
added to the system. You can see if they are currently in use or disabled. You can also
see relevant information about the sensors, such as type, receiver in use, communication
channel, and where they are placed on the fishing gear.
Related topics
Add New Sensor dialog box, page 284
Select Sensors dialog box, page 277
Sensor List page, page 234
Adding a new sensor that does not need configuration prior to use
When you want to put a new catch monitoring sensor to use, you need to add it to the
system.
Prerequisites
In order to read the data from a catch monitoring sensor, you must first connect one or
more receivers to the Processor Unit. This procedure assumes that a suitable receiver
unit has been connected to the Processor Unit, and that all relevant communication
parameters have been defined.
This procedure assumes that a suitable receiver unit has been connected to the Processor
Unit, and that all relevant communication parameters have been defined.
Context
Catch monitoring sensors are delivered from Kongsberg Maritime readily set up
with common default settings. Each individual sensor can be configured to specify
its communication channel, which measurements to make and some other relevant
operating parameters.
Note
If your new sensor has already been configured, you do not need to repeat the
configuration process to use it. If you wish to use older sensors (not PX family), these
must be configured using their dedicated applications before you add them.
The
Add New Sensor
dialog box starts a "wizard" that permits you to select the specific
catch monitoring sensor you want to put to use. If relevant, the "wizard" provides the
necessary configuration functionality. With the
Select Sensors
dialog box you are adding
previously configured sensors to the TV80.
The number of sensors you can add depends on your hardware configuration.
Procedure
1 Open the
Setup
menu.
Simrad TV80 Reference Manual