Kongsberg Simrad SN90, Installation Manual

Page: 11 / 298

381298/C
9
About this manual
Purpose of manual
The purpose of this manual is to provide the information, procedures and basic drawings
required for the physical installation of the Simrad SN90.
Target audience
The manual is intended for technical personnel; such as skilled shipyard workers,
electricians, qualified engineers and naval architects. It is assumed that you understand
the general principles of maritime electronic equipment. You must also be familiar with
computer hardware, interface technology and installation of electronic and mechanical
products.
We assume that you are familiar with the basic acoustic principles of sound in water,
and that you have some experience with sonar operation.
Installation instructions
You must follow the instructions in this manual to ensure optimal performance. As a
guide, installation procedures are presented in the order they must be done.
The equipment described in this manual includes the complete system with relevant
cabinets. Units provided locally by the customer, installation shipyard or local
representative are not described.
The manual also defines the equipment responsibility, and provides applicable
instructions for unpacking and storage of units.
Note
You must follow the instructions given in this manual. If not it may affect the warranty.
Kongsberg Maritime AS will accept no responsibility for any damage or injury to the
system, vessel or personnel caused by equipment that has been incorrectly installed or
maintained, or by drawings, instructions or procedures that have not been prepared
by us.
About this manual