2.10 Adjusting backlighting
The display and keypad are backlit - to set the backlighting
level press Shift followed by Call
(Dimmer) to enter back-
light mode.
Rotate the channel select knob to adjust the backlighting level
from off through to level 5..
Press Ok or ON/C to exit the backlight mode at the selected
level.
NOTE
Backlighting levels will only affect this station.
2.11 Handset / fistmike off cradle
When the handset / fistmike is lifted off cradle, all other sta-
tions will show “Occupied” on the display (Fig 2.9). This
means that these stations are locked out until the handset /
fistmike is returned to the cradle, unless the station is being
called on intercom by the station.
Instruction Manual
19
Part No. E04461
NOTE
The station plugged into the lowest numbered port is desig-
nated the Master unit. Lifting the Master handset / fistmike
will override all other stations, even if it is displaying
“Occupied” - all other stations will then display “Occupied”
and be locked out.
STAT I ON
AA
2
OCCUP I ED
BB
INT
16
Fig 2.9 - Station 2 is in use