Kongsberg Simrad MF90, Installation Manual

Page: 196 / 426

194
476671/B
6 Make sure that the unit has been identified with the relevant product label(s), and that
one label includes the part and serial numbers.
Result
Requirements Results
The Operating Panel is correctly installed with easy access for maintenance and
replacement of parts.
The Operating Panel is free from scratches, dents or other physical damage.
Free access to all the connectors on the Operating Panel are provided.
All cables are properly mounted with enough slack.
Date and signature:
Related topics
Setting to work, page 186
Inspecting the installation of the MF90 system, page 189
Visual inspection of the Transceiver Unit
A visual inspection of the transceiver is required to verify that the unit has not been
physically damaged during the installation.
Prerequisites
The MF90 system hardware units are installed as specified in this manual. You need the
following test equipment:
• Multimeter
Procedure
1 Make sure that the Transceiver Unit is installed in the correct location, and that it is
suitably oriented for easy maintenance and replacement of parts.
2 Make sure that the Transceiver Unit is fully populated with all the circuit boards and
modules mounted.
3 Make sure that the physical installation of the unit has been completed.
a Make sure that the cabinet door can be fully opened for unrestricted access.
b Make sure that ample space is provided around the unit to allow for maintenance
and replacement of parts.
c Make sure that the bolts, screws or studs that have been used are all of the correct
size.
Simrad MF90 Installation Manual