manualshive.com logo in svg

Kongsberg SIMRAD IS15 Expander, General Manual, Page: 98 / 106

Share
Download
Kongsberg SIMRAD IS15 Expander General Manual Download Page 98

IS15 General Manual

96

20220760G

Condition

Probable Cause

Action

There are no
Waypoint Data
displays, even
though the Course
Over Ground display
is working.

The required data is
not available from the
GPS/Plotter.

Check that the GPS/Plotter has a
destination Waypoint.

Make other checks as for ‘no navigation
displays’, above.

There is no Cross
Track Error display,
even though the
Waypoint and
Course Over Ground
displays are
working.

The required data is
not available from the
GPS/Plotter.

Check that the GPS/Plotter is in Navigate
Mode.

Make other checks as for ‘no waypoint
displays’, above.

True / Magnetic
Course Over Ground
and Waypoint
Bearing data is not
shown, even though
the other format is
available.

Data of the required
format is not being
transmitted by the
GPS/Plotter.

Check that the GPS/Plotter is set to the
same navigation mode, and is set up to
transmit the correct navigation format.

Contact your dealer.

Roblink test displays

The Roblink test display monitors the data flow on the Roblink.
The IS15 Multi does not display a Roblink Test.

The Roblink test display on the IS15 Combi is entered as
follows:

•

 

Press and hold the 

 button for 10 seconds to enter the

installation setup ‘GENERAL’ display.

•

 

Press and hold the 

 button for 2 seconds.

•

 

Press the 

 or 

 button until the display reads:

ROBLINK TEST

Execute

GENERAL

•

 

Press and hold the 

 button for 2 seconds to start the test.

Summary of Contents for SIMRAD IS15 Expander











































































































Reviews:

No comments