Kongsberg Simrad FM90i Reference Manual Download Page 44

Page: 44 / 104

922-00047001/1.1

Saving and recalling screen captures

Topics

Saving and retrieving images, page 42

Recording sonar data, page 43

Playing back a recording, page 43

Saving and retrieving images

With one click, you can capture images of the up-sounder view, down-sounder view, net
opening view and sensor panes.

Context

Click this button to save sonar view images, including any overlays you’ve
placed in the sonar views.

This button is located on the top bar.

Procedure

Click the

Save image with overlay

button.

Note

A “Save As” dialog box will appear if you have checked the

Prompt User for Filename

box in the

Preferences

dialog box.

Retrieve your images and view them.

Using the Windows

File Explorer, navigate to C:\KML\FM90i_V0100\Images.

Alternatively, navigate to where you saved your images earlier.

Open the images with your preferred image viewer.

Related topics

Save image with overlays, page 64

Simrad FM90i Reference Manual

Summary of Contents for Simrad FM90i









































































































Search results

Summary of Contents for Simrad FM90i

Reviews:

Related manuals for Simrad FM90i

Brands by name

Popular brands

Kongsberg Simrad FM90i, Reference Manual

Search results

Summary of Contents for Simrad FM90i

Reviews:

Related manuals for Simrad FM90i

Brands by name

Popular brands