Rules for transducer
handling
To secure the long life and accu-
rate results, the transducer must
be handled correctly.
A transducer must always be
handled as a delicate item.
Wrongful actions may damage
the transducer beyond repair.
Observe these transducer
handling rules:
• Do not activate the transducer
when it is out of the water.
• Do not handle the transducer
roughly, avoid impacts.
• Do not expose the transducer to
direct sunlight or excessive heat.
• Do not use high-pressure water,
sandblasting, metal tools, or
strong solvents to clean the
transducer face.
• Do not damage the outer protec-
tive skin on the transducer face.
• Do not lift the transducer by the
cable.
• Do not step on the transducer
cable.
• Do not damage the transducer
cable, avoid sharp objects.
E
I
E
B
D
G
A
B
C
H
F
Installation principles
• (A) Steel blister, must be manufactured by the shipyard
• (B) Mounting ring
• (C) Bolt (M10x100, maximum torque 31 Nm)
• (D) Self-locking threads
• (E) Air outlet
• (F) Forward
• (G) Transducer cable
• (H) Observe the marking on the transducer that identifies “forward”
• (I) Water drainage
For more information regarding installation, refer to the ES38-10 Installation
manual
