36
394149/D
General safety rules
The following safety precautions must be followed at all times during installation and
maintenance work:
WARNING
This equipment operates on 230 VAC at 50/60 Hz. This voltage is lethal! You must
never work alone on high-voltage equipment!
• You must always switch off all power before installation or maintenance work on
the EK80 system.
Use the main circuit breaker, and label the breaker with a warning sign that informs
others that maintenance or installation work is in progress on the system.
• For safety reasons, two persons must always be present during troubleshooting with
power ON.
• Read and understand the applicable first aid instructions related to electric shock.
• Whenever maintenance is in progress, it is essential that a first aid kit is available, and
that all personnel are familiar with the first aid instructions for electrical shock.
Simrad EK80 Installation Manual
Summary of Contents for Simrad EK80
