Kongsberg Simrad EK80, Installation Manual

Page: 13 / 354

394149/D
11
About this manual
The purpose of this manual is to present the descriptions and drawings required to install
the Simrad EK80 Wide band scientific echo sounder.
Note
The EK80 software supports several different transceiver units. The information is
mainly prepared for EK80 installations on a vessel. For installation of other transceivers
supported by the EK80, see the relevant publications.
Target audience
The manual is intended for technical personnel; such as skilled shipyard workers,
electricians, qualified engineers and naval architects. It is assumed that you understand
the general principles of maritime electronic equipment. You must also be familiar with
computer hardware, interface technology and installation of electronic and mechanical
products.
Installation instructions
The instructions provided in this manual must be followed carefully to ensure optimal
performance. As a guide, installation procedures are presented in the order they must
be done.
The equipment described in this manual includes the complete system with relevant
cabinets. Units provided locally by the customer, installation shipyard or local
representative are not described.
Information about third party products and/or services may not be included in this
manual, even though these may be provided as a part of the EK80 delivery. Refer to the
relevant end-user documentation provided by the manufacturer.
Note
Kongsberg Maritime AS will accept no responsibility for any damage or injury to the
system, vessel or personnel caused by equipment that has been incorrectly installed or
maintained, or by drawings, instructions or procedures that have not been prepared
by us.
About this manual