Kongsberg Simrad CS90, Reference Manual

Page: 313 / 686

442700/A
311
Record
A useful function of the CS90 system is it ability to record echo data. Use the raw data
recording functionality provided by the CS90 system to save echo data using the
*.raw
format. You can save the data to the hard disk, or onto an external storage device. The data
files can be played back on the CS90 system. The data files can later be deleted, copied or
moved to another storage device.
Description
The indicator is red when recording is in progress.
Note
The data files will normally become very large. If you wish to record large amounts of
data, make sure that you have enough space on your hard disk. The CS90 system is not
provided with unlimited disk capacity. We recommend that you save the data files to an
external storage device.
Tip
Use the processed data recording function provided by the CS90 system to record processed
echo data.
Related functionality
Replay bar
During replay, the dedicated replay bar is shown immediately under the top bar. The
replay bar allows you to retrieve saved files, and to control the playback.
Record RAW function
The
Record RAW
button allows you to start and stop recording, split the current
recording file (if it gets too large), and set up the file output parameters. Once all the
recording parameters have been defined, you can start recording by clicking the red
circle on the button, and stop it by clicking the left rectangle.
Record RAW
is located
on the
Operation
menu.
Recording dialog box
When the recording is stopped, the
Recording
dialog box opens automatically. Use the
Recording
dialog box to add metadata to your recording.
File Setup page
The
Output
dialog box on the
Operation
menu allows you to set up the recording
parameters. To define which disks and folders to use to save the data files, select
File
Setup
. Set up the file and folder parameters before you start the recording. If you wish
User interface