Kongsberg SIMRAD 11252236, Manual

Page: 8 / 32

Tillerpilots TP10/TP22/TP32
8
E04818 Issue 1.0
1.2 The SimNet network system
The SimNet system is built around a high-speed bus network-
ing system, that allows the TP22 and TP32 to be easily inter-
connected to Simrad instruments and navigation equipment.
Units are interconnected and powered using a standard single
cable (Fig 1.2).
The Tillerpilot can receive navigational information from the
chartplotter for Steer To GPS (Nav mode).
It will also accept wind angle data from the wind transducer for
Steer To Wind mode, boat speed data from the Speed instru-
ment, and heading data from the compass transducer.
Additionally, heading data from the Tillerpilot’s built-in fluxgate
compass can be displayed on any instrument displays capable of
showing compass information.
Note Heading data from the Tillerpilot will only be shown on instru-
ment displays if there is no external compass transducer pres-
ent on the network. Priority is always given to external com-
pass transducers for heading data.
SPEED/LOG
TILLERPILOT TP22 & TP32
COMPASS
GPS/CHARTPLOTTER
WIND
WIND Tx
COMPASS Tx
Fig 1.2 - Typical SimNet system