Kongsberg Seatex Seapath 200, Installation Manual

Page: 30 / 130

Seatex Seapath 200 Installation Manual, rev. 13 Installation
16
or transversal bulkheads of the ship with the opening pointing downward, as shown in
Figure 5. This will ensure easy and accurate orientation of the MRU according to the
longitudinal axis. Reserve sufficient space below the bracket to allow insertion of the
MRU from below.
Figure 5 Recommended orientation of the MRU mounting bracket
6. Mount the MRU bracket on the wall, preferably with the opening pointing down, as
shown in Figure 6. Mark and drill a M6 hole for the top screw (1) and enter the screw
without tightening it completely. Align the bracket vertically using its own weight or by
aligning it in relation to the wall. Drill two holes for the lower screws (2) and insert and
securely tighten all three screws, using washers or self-locking nuts.
Figure 6 Wall mounting of bracket with MRU connector pointing down