Kongsberg Seapath 320, Technical Manual

Page: 74 / 100

Seapath 320
60 Man_techn_seapath320/rev.1
When the mouse cursor hovers over a satellite
symbol, a tooltip will appear with the status of
the satellite including azimuth, elevation, L1/L2
signal-to-noise ratio and differential correction
availability.
If the vessel has a gyro interfaced, the display
shows the vessel's true heading.
Figure 40 Tooltip for GPS satellite
with corrections
The shadow sectors have no effect on
calculations but will assist in explaining why
some satellites are not used in the position fix.
The Sky view is configured in the Sky view tab
in the Operator software configuration dialog.
It is possible to enable or disable the correction
satellites, the signal bars, the track plot and the
shadow sectors.
Figure 41 Tooltip for GLONASS
satellite with corrections
5.4 DGNSS views
There are two DGNSS views, DGNSS age view and DGNSS status view. Both views
indicate the status of the available correction links.
All links are indicated using green colour if correction data are received, red if no data
are received through that link, or light grey if the link has been disabled for some
reason.
Status of up to 9 correction links may be displayed. Each link is identified by its name
as defined in the Configuration file. The number of reference stations used in the
position calculation and the number of reference stations available are indicated for each
correction link.