Kongsberg MBR 144 OEM Instruction Manual Download Page 9

Page: 9 / 74

G210–58/2

About this manual

Purpose of manual

The purpose of this manual is to provide the descriptions and procedures required to
install, configure, operate and maintain the MBR 144 OEM.

Target audience

This publication is intended for all users of the MBR 144 OEM system. This includes
project engineering personnel, installation personnel, IT administrators and operators.

License information

The MBR 144 OEM is not subject to product licensing. The product is a radio
transmitting device. A frequency license is required for operation.

Maintenance purposes

This manual is also intended as reference material for the maintenance personnel. Keep
this manual for later use.

Software version

The

Operation

chapter in this document is for Maritime Broadband Radios with software

version 2.18 or higher.

This document describes the web interface configuration. For use of API (Application
Programming Interface), refer to the API documentation.

About this manual

Summary of Contents for MBR 144 OEM











































































Search results

Summary of Contents for MBR 144 OEM

Reviews:

Brands by name

Popular brands

Kongsberg MBR 144 OEM, Instruction Manual

Search results

Summary of Contents for MBR 144 OEM

Reviews:

Brands by name

Popular brands