KONGSBERG K-Sync
Runtime settings
Each echo sounder has its own set of configurable runtime settings. These settings
establish how the Synchronizing Unit will determine when the echo sounder is ready to
be triggered and when it can advance to the next group.
The runtime settings are available in the
Runtime Settings
dialog. To open the dialog,
select from the application menu:
Settings
→
Runtime Settings…
The dialog shown in
figure
on page 42 then appears.
Figure 34
Runtime settings dialog
In the upper left hand corner the echo sounder is selected. Just below, the trigger mode is
specified. The trigger mode determines which method the Synchronizing Unit will use
for timing the echo sounders (see section
on page 44). The special trigger
settings are covered in section
on page 49. Some background
information about timing is discussed in section
Determination of active period
on
page 43.
Note
The runtime settings are specific to each user configuration profile.
42
342435/B