Kongsberg cNODE MiniS, Instruction Manual

Page: 29 / 62

397152/E
29
Battery charger status and troubleshooting
The battery charger has a LED indicator for easier troubleshooting.
LED indicator What it means How to fix this
Flashing green The battery is charging
Steady green The battery is fully charged
Flashing red • The charger is not connected
to the transponder
• Failure in charger/transponder
connection
• Charger might be faulty
Disconnect all cables and wait 1
minute before reconnecting the
cables and connect power supply
to mains (110 or 220 Vac).
If the LED indicator is still
flashing red:
Charger might be faulty Contact
your local Kongsberg Maritime
office.
Steady red • The battery temperature
might be outside the charging
specification
• Possible battery failure
• Let the unit warm up or
cool down to an ambient
temperature of 10 °C to 40 °C
before charging.
• Disconnect all cables and wait
1 minute before reconnecting
the cables and connect power
supply to mains (110 or 220
Vac).
If the LED indicator is still
flashing red:
Possible battery failure Contact
your local Kongsberg Maritime
office.
No light It normally takes about 30
seconds before the battery
starts charging and the LED
indicator starts flashing green
after connecting the cNODE
battery charger to the cNODE
MiniS and then to the mains (110
or 220 VAC). Disconnect all cables and wait 1
minute before reconnecting the
cables and connect power supply
to mains (110 or 220 Vac).
The charger or cNODE MiniS
might be faulty. Contact your
local Kongsberg Maritime office.
Maintenance