Kongsberg cNODE Maxi 31 Ex d, Instruction Manual

Page: 17 / 50

390755/G
17
Installing the cNODE Maxi
31 Ex d
Correct installation is essential for keeping the transponder safe in an explosive
atmosphere.
Prerequisites
The pre-deployment checks must be completed before installation can begin.
Procedure
1 Mount the transponder with the transducer having a free line of sight.
2
Important
The transponder must be earthed.
Fit the transponder to the brackets.
At least one part of the bracket must be metal in direct contact with the transponder
tube.
3 Fit the transponder in such a way that the transducer does not move.
The transducer must be at least 0.2 mm from any metal surface to avoid the ignition
hazard due to impact or friction.
Installing the cNODE Maxi 31 Ex d