Konftel Konftel 300IP, Installation And Administration

Page: 17 / 28

30 31
SYStEM

Select
Settings
>
System
.
Application restart
The Restart button restarts the phone application. This takes less than 30 seconds.
On phone: MENu > SYStEM > REStARt (6,1).
System reboot
The Reboot button reboots the conference phone. The starting procedure may take
about two minutes.
On phone:
MENu
>
SYStEM
>
REboot
(6,2).
System configuration
The Reset button resets Konftel 300IP to factory default settings. Every personal set -
ting including account information is erased.
On phone: MENu > SYStEM > FACtoRY RESEt (6,3).
hard reset to factory settings
See page 45 about resetting the phone if you have forgotten the Admin PIN code.
SEttINgS
 Select Settings > Provisioning .
FIRMWARE uPgRADE
Konftel 300IP is easiest upgraded via a computer connected to the same network. Via
the web interface, you can check if a later version is available, and then automatically
install it.
It is also possible to download the latest version, via the Konftel website ( www.konftel.
com/300ip ), and then install the file via the web interface.
 Click on the Check Now button.

Compare the latest software version with the current version (shown on the same
page).
 If you choose to upgrade, select version in the list box and click on the upgrade
button.
The browser window and the Konftel 300 iP display shows that the upgrading has begun.
 The download and installation can take several minutes. Do not interrupt the
upgrade and do not disconnect any plug on Konftel 300IP during the upgrade. An
interrupted upgrade can make the conference phone unusable.
PRovISIoNINg – uPgRADE AND CoNFIguRAtIoN