Koncar NO90LIG, Instruction Manual

Page: 72 / 78

1. Press this button to turn on the product.
ð
When the product is turned on it will start operating at
level 2. The speed can be increased or decreased as
required.
2. Pressing this key will decrease the speed.
3. Pressing this key will increase the speed.
4. Sets the timer with increasing its start-up hour value. Each
time the key is pressed, the timer's hour value will increase
by 1, you can press and hold the key to increase the value
rapidly.
5. Sets the timer with decreasing its start-up hour value. Each
time the key is pressed, the timer's hour value will decrease
by 1, you can press and hold the key to decrease the value
rapidly.
6. Press this button to turn on and off the lamp.
Programmable options can be set while the motor
and lamp are turned off and the timer is not set.
Press and hold key for 5 seconds to display the blue color per-
centage. (e.g. B 00) Press key again to display the read color
percentage. (e.g. R 100). Press key again to display the green
color percentage. (e.g. G 10) Press the displayed color and
keys to set the percentage value between 0-100 (press and hold
for rapid setting). Press and hold key for 5 seconds to save the
new color (a beeping will be heard) and exit the setting mode.
Press Mot/off or lamp keys to exit the setting mode without saving.
As a factory setting, the back light lights steadily. Optionally, press
and hold key for 5 seconds (a beeping will be heard), the back
light can be set to be turned off while the motor and the lamp are
turned off and the timer is not set (that is the hood is not opera-
tion). Press and hold key for approx. 5 seconds to set the back
light is lit continuously again.
LCD Switch Button Location
Fig. 18: LCD switch button definition
Back light brightness setting
Back light option:
Use of the LCD Product
25.12.2017 4110 HOOD USER GUIDE 29