EN-6
BEFORE USING THE APPLIANCE
Installing and operating your fridge
Before starting to use your fridge, you should pay attention to the
following points:
•
Operating voltage for your fridge is 220-240 V at 50Hz.
•
Mains cord of your fridge has a grounded plug. This plug should
be used with a grounded receptacle that has a 16 ampere fuse
minimum. If you don’t have a receptacle confirming with this,
please have it done by a qualified electrician.
• We do not take the responsibility of the damages that occur due
to ungrounded usage.
• Place your fridge in a place that it would not be exposed to direct
sunlight.
•
Your appliance should be at least 50 cm away from stoves, Gas
ovens and heater cores, and should be at least 5 cm away from
electrical ovens.
•
Your fridge should never be used outdoors or left under the rain.
• When your fridge is placed next to a deep freezer, there should
be at least 2 cm between them to prevent humidity on the outer
surface.
•
Do not place anything on your fridge, and install your fridge in
a suitable place so that at least 15 cm is available on the upper
side.
•
The adjustable front legs should stabilized in an appropriate
height to allow your fridge operate in a stable and proper way.
You can adjust the legs by turning them clockwise (or in the
opposite direction). This should be done before placing food in
the fridge.
•
Before using your fridge, wipe all parts with warm water added
with a tea spoonful of sodium bicarbonate, and then rinse with
clean water and dry. Place all parts after cleaning.
• Install the distance adjustment plastic (the part with black vanes
at the rear) by turning it 90° as shown in the figure to prevent the
condenser from touching the wall.
•
Refrigerator should be placed against a wall with a free distance
not exceeding 75 mm.
