Koncar L1A 54 245.BF, Instruction Booklet

Page: 50 / 55

EN - 48 -
PART 6.
BEFORE CALLING YOUR AFTER SALES SERVICE
If your freezer is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
What to do if your appliance does not operate;
Check that;
• There is no power,
• The general switch in your home is disconnected ,
• The thermostat setting is on « • » position ,
• The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your appliance performs poorly;
Check that;
• You have not overloaded the appliance ,
• The freezer thermostat settings is “1” position (if so set the thermostat dial suitable
value)
• The doors are closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and side walls.
PART 5.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
Transportation and Changing of Installation Position
• The original packages and foamed polystyrene (PS) can be concealed if required.
• In transportation the appliance should be tied with a wide stripe or a strong rope.
The rules written on the corrugated box must be applied while transporting.
• Before transporting or changing old installation
position, all the moving objects (i.e. shelves,
crisper…) should be taken out or fixed with
bands in order to prevent the shake.
Repositioning the Door
• It is not possible to change the opening direction of your freezer door, if the door
handles on your freezer are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any
handles.
• If the door opening direction of your freezer may be changed, you should contact the
nearest Authorized Service to have the opening direction changed.